Home About Us Furnaces Fittings Loading Certificate News Contact
Expanded Perlite Electric Furnace
PATENT£º200320115796.2
High Temperature Bogie-hearth Furnace
PATENT£º200520096582.4
Pre-Pumped Vacuum Electric Furnace
PATENT£º200520096581.X
Crucible Aluminium Melting Furnace
PATENT£º200520096580.5
Raceway Type Quenching Furnace
PATENT£º200520096583.9
 
×îвúÆ·
  Glidewheel Aluminium Alloy Furnace
Ion-exchange Salt-bath Furnace
Drum Catalyst Roasting Furnace
Magnesium Alloy Furnace
High Temperature Bogie-hearth Furnace
Mid-temperature Bogie-hearth Furnace
Low-temperature Bogie-hearth Furnace
High-Precision Bogie-hearth Furnace
Large Bogie-hearth furnace
Two car type Bogie-hearth Furnace
Bogie-hearth Furnace with Fiber Lining
Pre-Pumped Bogie-hearth Vacuum Furnace
Turnover type Bogie-hearth Furnace
Bogie-hearth tempering Furnace
Bogie-hearth Quenching Furnace
Bogie-hearth Ageing Furnace
Bogie-hearth nozzle Sintering Furnace
Bogie-hearth mould Preheating Furnace
Bogie-hearth Shuttering burning Making
Bogie-hearth Bit-sintering Furnace
Oil fired Bogie-hearth Furnace
Bogie-hearth shrink Furnace
1600¡æ Box Furnace
1350¡æ Box Furnace
1200¡æ Box Furnace
Mid-temperature Box Furnace
High-temperature Box Furnace
High-Precision High-T Box Furnace
High-Precision Mid-T Box Furnace
Box type Oil-fired Forging Furnace
Hot driving heating Furnace
High Temperature pit Furnace
Mid-temperature pit Furnace
Low-temperature pit Furnace
Pit tempering Furnace
Pit al-alloy quenching Furnace
Pit al-alloy Ageing Furnace
Crucible Melting Electric Furnace
Crucible Aluminium Melting Furnace
Crucible Lead-melting Electric Furnace
Oil Burning Crucible melting Furnace
Gas Crucible Aluminium melting Furnace
No crucible Gas heat-retaining Furnace
No crucible Oil heat-retaining Furnace
No crucible Gas melting Furnace
No crucible Oil melting Furnace
Square Crucible Zinc-plating Furnace
Crucible Glue Digeste Furnace
Pit Gas Carburizing Furnace
Pit Gas Carbonitriding Furnace
Sealed Box Type Carburizing Furnace
Pit Gas Nitriding Electric Furnace
Pit Vacuum Nitrogen Annealing Furnace
Nitrogen Nozzle Sintering Furnace
Large Nitrogen Tempering Pit Furnace
Automatic Thermostatic Blast Air Oven
High Temperature Blast Air Oven
Bogie-hearth Blast Air Oven
Raceway Blast Air Oven
Drying Sintering Oven
Box Type Glass Melting Oven
Box Type Organic Drying Oven
Swing Austempering Nitrate Furnace
External Heating Type Nitrate Furnace
Internal Heating Type Nitrate Furnace
Embeded Electrode Salt-bath Furnace
Crucible Salt-bath Furnace
Laboratory Crucible Salt-bath Furnace

















PRODUCTS   CONTENTS
Bell type Electric Furnace
Bell type Electric Furnace    Bell type Electric Furnace


Uses:
    Mainly used for cold-strip steel, the wire rod, the serpentined, the high alloy turbulent flow booster compressor casting, the exhaust pipe, the thin steel plate, the copper, the aluminum etc colored profession and so on metal plate, belt, alloy components, chain link, welding wire, standard letter, silicon steel plate, tool, spheroidizing, machinery annealing treatments.

Structure description:
    Bell-type Furnace are made up of furnace covers, in two furance places, two incovers, a cooling cover to be composed, heats up the cover to use the steel plate volume system to weld the formation densely, the furnace lining uses the energy conservation newest technology entire textile fiber modular structure, the furnace top folds the law high pressure for the entire textile fiber wave to tie up to hang the flat top, the high aluminum bolt loads clothing hung at full length the resistor tape, the furnace top installment diplopore quick freezing temperature decrease gate.

    The furance place for the heat preservation water cooling vacuum rubber seal structure, the stainless steel leads the wind seat stand, the high efficiency vacuum seal air blower.

    In covers for the stainless steel plate volume system welds the formation densely, covers the bottom flange and the vacuum seal groove by large-scale sets up the vehicle lathe finishing processing formation.

    Cooling covers by the double air blower screw blows of the rapid chilling. The vacuum pump is the 2X series turns on lathe the piece type mechanical vacuum pump.

    Bell-type Furnace controls the warm cabinet to use the microcomputer procedure craft curve high accuracy to control automatically warm, completes the heat treatment craft curve automatically. By the microcomputer through the operation positive governing thyristor, carries on the adjustment to the furance internal power, reduced the electrical network fluctuation, can act according to installs the furance quantity and the craft slope automatically from 0-100% change amount of power, realizes highly the festival electrically controlled warm.

More detailed technical___directly sale Tel:027-83372766 83372755 13807177084

Technical parameters:

Parameters Name   Model
RB-100/160-9 RB-120/180-9 RB-140/160-9 RB-140/200-9 RB-150/200-9 RB-150/250-9
Rating Power KW 160 180 220 300 320 380
Rating Voltage V 380 380 380 380 380 380
Highest Temperature ¡æ 900 900 900 900 900 900
Working Temperature ¡æ 850-900 850-900 850-900 850-900 850-900 850-900
Phase Number   3 3 3 3 3 3
Hearth
size
Dia. mm ¦µ1300 ¦µ1500 ¦µ1700 ¦µ1700 ¦µ1800 ¦µ1800
Height mm 1800 1800 1800 2300 2300 2800
Stainless steel
tank size
Dia. mm ¦µ1000 ¦µ1200 ¦µ1400 ¦µ1400 ¦µ1500 ¦µ1500
Height mm 1600 1600 1600 2000 2000 2500
Heating Element   Y Y Y Y Y Y
Heating-up Time h ¡Ü3 ¡Ü3 ¡Ü3.5 ¡Ü3.5 ¡Ü3.5 ¡Ü4
Lose Power KW ¡Ü48 ¡Ü54 ¡Ü66 ¡Ü90 ¡Ü100 ¡Ü110
Maximum Loading Kg 2000 3000 5000 15000 18000 20000
Weight kg 5000 6500 8000 10000 12000 15000

Parameters Name   Model
RB-160/200-9 RB-160/250-9 RB-190/170-9 RB-200/250-9 RB-300/300-9 RB-400/300-9
Rating Power KW 360 400 420 500 660 720
Rating Voltage V 380 380 380 380 380 380
Highest Temperature ¡æ 900 900 900 900 900 900
Working Temperature ¡æ 850-900 850-900 850-900 850-900 850-900 850-900
Phase Number   3 3 3 3 3 3
Hearth
size
Dia. mm ¦µ1900 ¦µ1900 ¦µ2200 ¦µ2300 ¦µ3300 ¦µ4300
Height mm 2300 2800 2000 2800 3300 3300
Stainless steel
tank size
Dia. mm ¦µ1600 ¦µ1600 ¦µ1900 ¦µ2000 ¦µ3000 ¦µ4000
Height mm 2000 2500 1700 2500 3000 3000
Heating Element   Y Y Y Y Y Y
Heating-up Time h ¡Ü4 ¡Ü4 ¡Ü4 ¡Ü4.5 ¡Ü5 ¡Ü5
Lose Power KW ¡Ü110 ¡Ü120 ¡Ü120 ¡Ü150 ¡Ü200 ¡Ü210
Maximum Loading Kg 20000 25000 20000 28000 30000 40000
Weight kg 13000 18000 18000 20000 28000 33000

Co. Add£º
Tel£º
Service£º
24Hours£º
Fax£º
postalcode£º
URL£º
MSN£º
E-mail£º
No.18 Wuhan Yinhu Industrial Park Dongxihu Area Wuhan China
+86-27-83372766 / 83372755 / 83391112 / 85416680 / 13807177084
+86-27-83372568 / 85629181
+86-13807177084 / 13607147220
+86-27-85879039 / 83372487
430040
(CN)www.hkfurnace.cn / (EN)www.hkfurnace.com
hkfurnace@hotmail.com
hkfurnace@hotmail.com / hkfurnace@gmail.com / 83372568@163.com
COPYRIGHT 1999 - 2011 WUHAN HANKOU FURNACE Co.,LTD ALL COPYRIGHT RESERVED